• Adapter card for PC/104+ or PMC
  • DN3000k10/S
  • DN5000k10/S
  • DN6000k10/S/SC
• Fast communication between ESBC and motherboard
  • 100 MHz
  • Up to 162 signals
• Partial list of available functions:
  • Analog to Digital converters
  • Digital to Analog converters
  • Analog I/O
  • Digital I/O
  • 10/100/1000-baseT
  • Gigabit Ethernet, 1553
  • Fibre Channel, FireWire, ISDN
  • CAN bus, ARCNET
  • PCMCIA
  • RS232/RS422/RS485
  • Hard disk, E-disk, Flash Memory
  • Video controllers
  • Single Board Computers (SBCs)
    • PowerPC, MIPS, X86, etc.
  • SCSI II/III
  • UARTs
  • FPDP
  • Avionics Bus interfaces
  • Video Frame Grabbers
  • Relay/solenoid drivers
  • Synchro/Resolver-to-Digital Converters
• Easily customizable reference design
  • Verilog and VHDL
• Supports +3.3 V or +5 V signaling for PMC and PC/104+
• 7 user-programmable LEDs
• Full tilt, 66 MHz/64-bit PCI data throughput
  • PCI-X capable
• 64-bit connection on PMC's J4
  • Customizable interface
• We recommend using the Daughter Card Extender when using 200-pin daughtercards.

• Product Brief - PDF[HI - 23.8MB|LO - 264KB]
• User Manual - PDF[PDF - 9.1MB]
• Daughter Card Compatibility Guide [PDF - 65KB]
• 200-pin Header Connection Summary [XLS - 2.7MB]

DNPMC104 Embedded Systems Board Carrier

The Embedded System Board Carrier (ESBC) mates a PC/104+ or PCI Mezzanine Card (PMC) board to any of the DINI group's Logic emulation products. This enables any DN-series of logic emulator boards access to the world of embedded systems interface products from dozens of vendors without the need to design custom daughter cards.

A Xilinx SpartanIIe and a QuickLogic QL5064 FPGA provide a user-customizable interface between the various mezzanine cards and the logic emulation motherboard.

Click thumbnail for larger view.

Top View

DNPMC104-C: for PC/104+ DNPMC104-M: for PMC

Bottom View

Embedded Systems Using DNPMC104

DNPMC104-C: for PC/104+ DNPMC104-M: for PMC Double Embedded System

Headers